ROMAG-GENERATOR

• This Romag Generator runs on renewable energy or free energy that is derived through magnets and the magnetic field of the Earth
• Generator produces magnetic current equivalent of 50 H.P. output
• Suggested use for generator is running free energy magnetic devices including the Magnetic Water Pump and the Pyramid Molecular Vibratory Exchanger Unit
• Generator does not produce pollution, so it is beneficial to the environment
• Generator is designed to recycle magnetic energy back into the Earth’s energy system
• Requires startup spinning to achieve 1850 RPM
• Requires special sintered magnets

We are providing this free information out of love to help heal our planet. Please help us in educating people about magnetic energy.

ABSTRACT

A note on terminology: Magnetic energy is also called life force energy (an energy occurring in all life and all things), zero-point energy (an energy that occurs even in the absolute zero temperature of space), ether (an energy that interacts with gravity and exists on a cosmic scale to guide celestial bodies and life) as well as other terms. The definitions of these different terms may be similar, but we are choosing to use magnetic energy to attempt to integrate the practical applications of this energy with the esoteric concepts behind this energy. Like wise, the Romag Generator may be called a free energy device, an over unity device, green technology, a perpetual motion machine (this is inaccurate as we will explain), a Tesla motor, and other names which may or may not be accurate depending on how individuals are defining these terms. We will try to define the terms we use to help prevent too much confusion.

The Earth is surrounded with a sea of energy that is pulsing and is constantly being supplied by a Universal energy system. This energy field that we call the Ionosphere supplies all of the energy needs on our planet. Like the other units we have presented, this Romag-Generator taps into this energy field, converts the energy into something that we can use, and then releases the energy back into the system. This unit, like the others, recycles the Earth’s magnetic energy, in fact, all these units cannot function if the energy is not getting recycled because the buildup of energy causes them to stop working.

When we present machinery that connects to the Universal energy mechanism, we are opening a whole new world. These concepts are nothing new, but we have yet to see them implemented in our societies. This technology is so far beyond electricity in its versatility and applications, there is absolutely no comparison. Magnetic energy can manifest as force fields, as fields with various characteristics like weightlessness; it can be transmitted through air and space, it can replicate other energy or matter, it can change the characteristics of energy and matter, it can be blended with various elements to produce various results like heat and cold, it can convert matter like garbage into a more pure energy, and the list goes on and on.

Magnetic energy is not confined to the simple force people observe between two magnets. Magnetic energy is more accurately described as an infinite variety of energy manifestations that are multidimensional in nature. This unit would have absolutely no connection to the Ionosphere if magnets were as simple as most people think. When magnets are spun at the proper speed and their fields are harnessed with the proper elements, they produce a frequency very similar to the ionosphere, and something magical happens. Because of the Universal phenomenon of attract-attract (where similar energies are attracted to each other), energy structures in the ionosphere begin to gather and swirl into a vortex as the unit attracts them. The small signal generated by the unit travels at a speed beyond space and time, and energy structures similar to it are attracted to it at the same velocity. This attract-attract phenomenon allows magnets to assist in a tremendous amount of energy generation. This motor is a magnetic device incorporating the use of permanent magnets turning in a rotor to generate a magnetic energy which is then circuited to other mechanisms to do useful work.

When electricity was first discovered, people wondered what it could be used for. At the time it seemed to have very few applications, but as people began to tap their creative potential, numerous uses emerged and continue to emerge today. The problem is electricity is slowing killing us and the environment. The pollution generated by electricity production is damaging the environment and it is only getting worse because electricity is becoming more widespread. Even more importantly, however, is the negative effect electricity has on the Earth’s energy field. Electricity generation produces harmful fields that interact with the Earth’s energy field in a unnatural manner. There is a very important natural phenomenon that occurs when electricity is generated. When electricity is generated there is an energy interaction with our ionosphere. The more powerful the electrical field, the greater the interaction with the ionosphere. The government clearly understands this concept because they invested billions of dollars on a project that is currently running in Alaska called H.A.A.R.P. (High-frequency Active Auroral Research Project) that focuses on the interaction between electricity and the ionosphere. The problem is that energy is stripped from the ionosphere when electricity is generated, and this energy removal without recycling causing a state a magnetic imbalance in the earth’s energy system. The ionosphere will respond to this energy imbalance by creating energy vortexes that draw energy back into the ionosphere. These energy vortexes can create tremendous storms that often involve tornadoes and hurricanes. The H.A.A.R.P. project has repeatedly demonstrated the effect of electricity generation on the weather. The generation of electricity must stop if we want to live in an environment that can actually sustain life.

Magnetic energy is better for the planet because it generates energy in a manner consistent with the natural principles that govern the Earth, and it recycles energy after it uses it. More over, magnetic energy does not create pollution, and through the proper technology, magnetic energy can help repair the damage we have done to the environment.

PRINCIPLE BEHIND THIS ENERGY SOURCE

This motor attracts neutral magnetic energy into the rotor magnets, sets up a response between various components which then complete a circuit that becomes the driving force to turn the structure.

SUMMARY OF THE DEVICE

An important objective of the present generator is to provide a revolutionary new concept concerning the utilization of power by directly capitalizing on the natural resource phenomenon of magnetism. Electrical power is the result of expending energy to drive a copper wire through a magnetic field. But magnetic energy is a natural resource needing a specific mechanism to draw on. There is no incorporation of a secondary energy source, except at start-up, to cause this magnetic unit to continuously function.

HOW THE UNIT FUNCTIONS

The Romag magnet motor/generator must be charged up by driving the main shaft at 1350 R.P.M. for 67 seconds. This charging process manifests as magnetic energy within the 10 coils of copper wire, the copper tube supporting these coils and the copper coated steel wires wrapped around the magnets. This charging is accomplished while the ten coil connection wires are making contact and setting up their alternating magnetic poles.

After the 67 second charging time one of these coil connection wires must be opened and this circuit again completed through an energy draw process. As current is drawn from the ten coils this ‘draw’ sets up magnetic poles which are a response between the rotor magnets and the coils. This response then causes the main shaft to be rotated by the permanent magnets as they attract and build a release field. Then the driver unit is disconnected allowing the unit to rotate with the load being the activating driving force.

Do not use ‘electrical teaching’ to presuppose how much of an energy flow is allowed to leave the coils by focusing on the wire size of these 10 coils. The magnetic current flow being circuited out through the copper wire has no dependency on this wire’s inner structure, in that the wire is only a point of transference where an exchange takes place, while producing ‘no heating’ of the wires/coils.

The fields of the magnets must be maintained during their spin movement. These magnetic fields which are encapsulated are achieved by the wiring system. The attract/release of the magnets is a function caused by several factors. First, the magnets attract field between north and south is completed by taking a crossing path of attract (top of one row to bottom of next, etc.). This action has the effect of fields blending into fields, and a hold-back attract does not happen. Each time a magnet set passes a coil an interchange of like energy between the coils around the magnets and the generating coils sets-up neutral polarities which are ‘release fields’ and prevents a hold-back attract.

One important magnetic assembly is the circuitry that allows this interchange of energy. This is a recycling of a stabilized magnetic energy not electro/magnetic because the field of force is not a case of electrical input, an input that created the magnetic, but rather a build-up of magnetic energy which caused an energy thrust.

In further defining the workings of this unit it is important to understand that although electrical and magnetic (energy) work with similar attitudes, the manner in which they work sets-up a differing energy effect. One of these effects is that magnetic structures want to share their flow, compatible to the Universal Force, while electrical flow argues, (short circuits, sparks, etc.). Because of this fact the working responses (within the unit) take place, ‘how they are needed’, and ‘when they are needed’ which results in a functioning unit. There is a continuous transmutation process taking place whereby magnetic energy continually generates an energy that manifests a measurable current. This ‘removed current’ is best described as low voltage at very high amperage and if this energy is used to its maximum potential then it will outproduce the power produced by a standard 50 H.P. electrical generator.

With a constructed unit that functions continuously, there comes an awesome awareness that by allowing the now set laws of physics to be changed error is corrected. We can then discover that magnetism has a true value and is not an obscure by-product. From this mental freedom will come discoveries heretofore unknown concerning magnetic fields.

The following are claims to summarize important points about the unit:

1) A magnetic powered device that utilizes a natural, neutral and universal magnetic energy and makes the energy available for use to a different device that is designed to attract the energy from this unit. For example, this Romag-Generator can power the Magnetic Water Pump or the Pyramid Molecular Vibratory Exchanger Unit.

a) A device whereby a rotating portion is supported in an appropriate housing

b) Rotating portion being a rotor which has secured to it an array of magnets uniformly spaced and that when properly charged cause motor rotation

c) Said rotor having secured to it coils of wire, properly arranged to encapsulate the fields of the rotating magnets, which then produce an ongoing magnetic energy

d) Said rotor and parts being constructed from known metals that are necessary for the conductive activity used in a magnetic circuit

e) Rotor in said unit having a particular spacing of magnets that produces the necessary requirements to achieve the end result which when in action has a stop gauge effect on the productive magnetic system

f) Part in said device being a stationary metal tube that creates a stabilizing boundary for the magnetic field of the unit

g) Unit has a magnetically pressurized tube that serves as a magnetic reservoir whereby magnetic energy is circuited, as needed, to coils for energy removal, i.e., power lighting fixtures, pumps, etc.

h) Copper coils wrapped around said metal tube in such a manner as to respond to rotating magnets causing continuous rotation. The device utilizes an attracting system that freely converts magnetism, (from permanent magnets) into magnetic energy, utilizes and returns it to its original state.

i) The device has attracting system comprising a wiring arrangement whereby the attracting force is caused to release at the needed release moment to allow continuous rotation.

j) The device uses a rotational movement that includes a control means for accurately maintaining the number of revolutions per minute.

k) The device has a means for activating the unit into motion.

l) Further identified as a device wherewith the magnetic structures of the Earth, which are universal in effect, are utilized to bring about the evolution necessary for the discovery of the outer limits so that people and space can come together.

In the past, inventors have sent devices and drawings to Patent Offices claiming they had invented perpetual motion. We state that this motor, which is driven totally by permanent magnet power, in no way can be compared with perpetual motion in that the principle is not the same. When perpetual motion is discussed, it is mentioned in terms of unknown factors which produce an unknown force.

Here, in this Ro-Mag Generator, the force of attract-attract to attract-release within the magnetic structure can be observed, thereby producing the generating force to turn the rotor which in turn produces the outflow of power. This power source is not predicated on a continuous flow of energy but predicated on the consistency of the transmutation process of the magnetic molecular structures within the Earth’s pressure flow.

Parts list for Romag-Generator

1) ALUMINUM BASE PLATE, 21″ DIA., 1/2″ THICK WITH 1-3/8″ BORE. THE PURPOSE FOR THIS EXTENDED BASE DESIGN IS TO BALANCE OUT THE STRUCTURE WHICH THEN EQUALIZES THE MAGNETIC FLOW.

2) ALUMINUM TUBE SECURED TO PART #1 MEASURING 21/2″ O.D.,1 3/8″ I.D. BY 1″ THICK

3) BOTTOM BRONZE BUSHING, 1-3/4″ LONG, 1-3/8″ O.D. BY 1″ I.D.

4) A TEFLON THRUST WASHER, 1″ I.D., 21/2″ O.D. BY 1/4″ THICK

5) A 1-3/4″ LONG BY 7/8″ I.D., BY 1″ O.D. TEFLON SLEAVE BEARING, GLASS FILLED (BOSTON GEAR) PRESSED ONTO CENTER SHAFT.

6) CENTER BRASS SHAFT, 14″ LONG, 1″ DIA., MACHINED AT ENDS TO 7/8″ DIA.

7) TOP COVER PLATE, 17-5/8″ O.D., 1/2″ THICK WITH A CENTER BORE OF 1-3/8″ MADE OF CAST SEMI- RED BRASS. DESCRIPTION:

Al 0.005 max Cu 75.0-77.0 Fe 0.40 max Ni 1.0 P 0.02 max Pb 5.5-7.0 S 0.08 max Sb 0.25 max Si 0.005 max Sn 2.0-3.0 Zn 13.0-17.0 Other Cu may include Ni; for continuous castings, P 1.5 max.

THE COVER BECOMES A CONDUCTOR OF THE PARTICLE ACTIVITY THAT IS GENERATED ON THE ROTARY MAGNETS AND SERVES AS AN INCOMING AND OUTGOING POINT OF MAGNETIC TRANSFERENCE.

ALUMINUM TUBE SECURED TO BOTTOM SURFACE OF PART #7, MEASURING 21/2″ O.D., 1-3/8″ I.D. by 1″ THICK

9) TOP BRONZE BUSHING, 1-3/4″ LONG, 1-3/8″ O.D. BY 1″ I.D.

10) A 1-3/4″ LONG BY 7/8″ I.D. BY 1″ O.D. TEFLON SLEAVE BEARING, GLASS FILLED, PRESSED ONTO TOP OF CENTER SHAFT.

11) ONE TOP 1/4″ KEY SLOT AND KEY TO SECURE ALUMINUM ROTOR PLATE TO SHAFT #6.

12) TOP ALUMINUM ROTOR PLATE, 13″ DIA. WITH 1″ BORE, 1″ THICK

13) ONE BOTTOM 1/4″ KEY SLOT AND KEY TO SECURE ALUMINUM ROTOR PLATE TO SHAFT #6

14) BOTTOM ALUMINUM ROTOR PLATE, 13″ DIA. WITH 1″ BORE, 1″ THICK.

15) TUBE HELD TO CENTER SHAFT BY PARTS #12 AND #14 MADE OF 83% COPPER, 3% ZINC, 7% TIN, AND 7% LEAD. TUBE MEASURES 8″ HIGH, 14-5/8″ O.D., 7/8″ WALL THICKNESS

16) THIN PLASTIC TAPE PLACED BETWEEN PARTS #12 AND #14 AS THEY ARE PRESSED INTO TUBE #15

17) ARE TEN TOP GROOVES CUT INTO TUBE #15 EQUALLY SPACED, MEASURING 4″ HIGH, 2-1/32″ WIDE BY .300″ DEEP.

18) ARE TEN BOTTOM GROOVES CUT INTO TUBE #15 EQUALLY SPACED AND ADVANCED FROM TOP GROOVES BY HALF OF GROOVE SIZE, ALSO MEASURING 4″ HIGH, 2-1/32″ WIDE BY .300 DEEP.

19) A .300″ WIDE SLOT CUT IN CENTER OF PART #15 FOR 360 DEGREES, TO A DEPTH OF 5/16″

20) TWO LAYERS OF MASKING TAPE PLACED INTO GROOVES #17 AND #18.

21) ARE 20 SETS OF 78 BENT COPPER WIRES PER SET, WIRES ARE COTTON COATED #19 WIRE (.036″ THICK – COPPER, NO VARNISH). THESE WIRES ARE HELD IN PLACE BY PART #20 WITH THE COTTON INSULATION NOT REMOVED.

22) ARE 20 MAGNETS MADE OF ALNICO 5 SINTERED MATERIAL, (COOLED IN A MAGNETIC FIELD) M-1076; 8 AL, 14 Ni, 24 Co, 3 Cu, bal Fe. PEAK ENERGY PRODUCT OF 3.5. EACH MEASURING 3-7/8″ HIGH, 1-7/8″ WIDE BY 3/8″ THICK, SECURED INTO GROOVES #17 AND #18 WITH BACK FACE OF MAGNETS DIRECTLY AGAINST COTTON COATING OF BENT WIRES #21

23) ARE 20 SETS OF ‘WIRE WRAPS’ PLACED AROUND THE 3/8″ WIDE PERIMETER OF ALL 20 MAGNETS; THERE ARE 9 TURNS PER WRAP OF .032″ THICK CLEAN COPPER COATED STEEL WIRE, MAKING FIRM CONTACT DIRECTLY TO MAGNETS

24) THE OUTSIDE SURFACES OF PARTS #23 MAKE FIRM CONTACT TO PARTS #21, THUS COTTON INSULATION IS REMOVED FROM BENT WIRES ONLY AT THIS POINT OF CONTACT.

25) THE TEN TOP SET OF WIRES #23 ARE CONNECTED WITH EXTENDED WIRES THAT GO FROM THE NORTH HALF OF THE 3/8″ WIDE SURFACE TO THE SOUTH HALF OF THE WIRE SET WHICH IS NEXT TO IT, THUS FORMING A CLOSED LOOP CONNECTION TO THESE TEN SETS OF WIRES.

26) THE TEN BOTTOM SET OF WIRES #23 ARE ALSO CONNECTED WITH EXTENDED WIRES THAT GO FROM THE NORTH HALF OF THE 3/8″ WIDE SURFACE TO THE SOUTH HALF OF THE WIRE SET WHICH IS NEXT TO IT THUS FORMING A CLOSED LOOP CONNECTION (NO CONTACT FROM TOP TO BOTTOM).

27) ARE 20 COPPER CONNECTING SLEAVES MEASURING 1/8″ O.D. BY .032″ I.D. BY 3/8″ LONG TO JOIN WIRES #25 AND #26 BY ALLOWING THE STEEL CORE TO CONTACT STEEL TO STEEL AND THE COPPER EXTERIOR COATING TO BE CONNECTED COPPER TO COPPER,THUS MAINTAINING TWO INDEPENDENT FLOW CIRCUITS.

28) ARE TEN PIECES OF MYLAR INSULATION MEASURING 2-1/32″ BY 5/16″ BY .010″ THICK, PLACED BETWEEN THE WRAPPED WIRES FROM THE UPPER MAGNETS TO THE LOWER MAGNETS, THUS THESE MAGNETS ARE LOCATED TO PRESS AGAINST THIS INSULATION WHICH IS LOCATED AT THE CENTER OF PART #19.

29) COPPER TUBE TO HOLD 10 COILS, TUBE MEASURES 151/2″ I.D., MADE OF THREE PIECES OF 1/16″ THICK COPPER RINGS, 8″ HIGH.

30) TWO PIECES OF .002″ THICK PAPER STRIPS, 8-1/8″ WIDE, PLACED BETWEEN PARTS #29.

31) ONE PIECE OF .100″ THICK MICA, 1/8″ WIDE BY 8″ LONG, PLACED AT THE SEAM OF COPPER TUBE TO MAINTAIN A SPLIT COPPER RING SPACING OF 100″. THE NEEDED MAGNETIC ACTION IN THESE COPPER RINGS INTERACTS IN DIFFERENT DIRECTIONS IN A SIMULTANEOUS MANNER AS A RESULT OF THE FACT THAT A MAGNETIC FLOW (AS OPPOSED TO ELECTRICAL) IS DOUBLED IN SPEED CAUSED BY THE MICA SEPARATION OF THESE COPPER RINGS.

32) TEN ‘LOCATOR GROOVES’ CUT INTO THE TOP AND BOTTOM OF TUBE #29, EQUALLY SPACED FOR 360 DEGREES. EACH GROOVE COVERS A DISTANCE OF 3-1/8″FOR COIL PLACEMENT.

33) ARE 10 BOTTOM COILS OF NUMBER 16 COTTON COATED COPPER WIRE, (NO VARNISH) PLACED AROUND GROOVES #32 WITH 45 TURNS, SPACED CLOSELY – WIRE TO WIRE.

34) ARE 10 TOP COILS OF NUMBER 16 COTTON COATED COPPER WIRE (NO VARNISH) PLACED CENTERED ABOVE THE 45 TURNS AND NESTED INTO THE GROOVES OF THE BOTTOM COIL WITH 23 TURNS WHICH SPAN 11/2″. AS THE BOTTOM COIL IS HAND WOUND, THE TOP COIL THEN GETS WOUND IN A ‘REVERSE DIRECTION’ THUS CAUSING A U SHAPED CONNECTION (NOT BROKEN) BETWEEN THE BOTTOM LAYER AND TOP LAYER FOR A TOTAL OF 95 FEET OF WIRE PER COIL.

35) CONNECTION PATTERN FOR THE TEN COILS IS A 1 TO 3 JUMPER CONNECTION PLACED FOR ALTERNATING COIL POLARITIES. (SEE SKETCH.)

36) ONE OF THE CONNECTIONS PART #35 IS OPENED AFTER A CHARGING SEQUENCE OF 67 SECONDS AT 1850 R.P.M. AND THEN GENERATED ENERGY IS CONTINUOUSLY EXTRACTED WITH THE LOAD BECOMING THE ACTIVATING DRIVING FORCE THUS SERVING AS A REPLACEMENT FOR THE JUMPER CONNECTION.

37) VERTICAL ALUMINUM ‘TUBE MEASURING 16-1/8″ I.D., 7/8″ THICK WALL AND 101/2″ HIGH. COILS #34 ARE UP AGAINST THIS TUBE’S INNER SURFACE WITH ONLY MASKING TAPE BETWEEN, THUS THE COILS ARE THE ONLY SUPPORT FOR PART #29. THIS ALUMINUM TUBE SERVES TO COMPLETE THE NECESSARY MAGNETIC CIRCUIT BY ITS THICKNESS WHICH SERVES TO SUPPLY THE NEEDED THERMOS-BOTTLE EFFECT, PREVENTING THE ESCAPE OF USEFUL MAGNETIC ENERGY AND ALSO AFFORDING EXIT POINTS FOR UNWANTED STRUCTURES WHICH THEN RETURN TO THE EARTH’S BALANCE SYSTEM.

38) A MINIMUM CLEARANCE OF 1/8″ UP TO 3/16″ BETWEEN THE INNER SURFACE OF TOP COIL #34 AND MAGNETS #22. A MAGNETIC PARTICLE WIND BUILDS WITHIN THIS SPACING THUS SUPPLYING THE NEEDED CIRCULATION FOR MAXIMUM MAGNETIC ENERGY WITHDRAWAL

39) ARE 20 BRONZE METAL STRIPS MEASURING 4″ LONG BY 1/8″ WIDE BY 1/16″ THICK, MADE OF 83% COPPER, 81/2% TIN, 51/2% LEAD AND 3% ZINC. EACH OF THESE METAL STRIPS GETS BONDED WITH CLEAR EPOXY GLUE TO THE TOP SURFACES OF THE BENT WIRES, PART #21 AND EXTENDS INWARD TO CONTACT THE WRAPPED WIRE PART #23, THEN RESTS AGAINST THE SIDE OF THE MAGNET. THIS METAL STRIP BUILDS, HOLDS AND RELEASES THE NEEDED MAGNETIC FIELD WHICH SUPPLIES THE RELEASE ACTION.

40) A COATING OF CLEAR ACRYLIC SECURED TO THE OUTER SURFACE OF THE ROTOR TO HOLD MAGNETS AND PARTS AS NEEDED.

41) THE ROTATIONAL DIRECTION IS COUNTER CLOCKWISE LOOKING AT THE UNIT FROM TOP DOWN.

42) NOTE- THE BENT WIRES PART #21, AT THEIR LEAD EDGE, DO NOT PROTRUDE PAST THE OUTER SURFACE OF PART #15. THEIR TRAIL EDGE IS 1/16″ BELOW THESURFACE OF THE MAGNET WHICH ALLOWS STRIP #39 TO BE LOCATED TO NOT EXTEND OUTWARD PAST THE MAGNET WHEN PLACED ABOVE THESE BENT WIRES.

43) NYLON SET SCREWS TO SECURE PLATES #12 and #14 TO PART #15.

1. A thermoelectric generator and magnetic energy storage unit

with controllable electric output comprising:

a) two dissimilar metal segments means joined to form a helix in a continuous loop in said unit,

b) a heating and cooling means to heat and cool alternate junctions of said metal segments means, thereby causing current flow and generation of a first magnetic field contained in said continuous loop;

c) a flux pump means with connections to said continuous loop to inject additional current into said current flow thereby increasing strength of said first magnetic field in said unit;

d) a switching means and output connection means located in said continuous loop with said output connection means located on either side of said switching means with said switching means controllably operable in fractions of a second and operating to discharge current into said output connections when said output connections are electrically connected to a load.

2. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 1 wherein said switching means comprises one of said segments in said continuous loop with means to induce a second magnetic field in said one of said segments at right angles to said current flow in said continuous loop thereby causing a potential difference across said segment, said potential difference may be varied by varying said second magnetic field thereby allowing withdrawal of a variable amount of energy through said output connections.

3. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 1 wherein said output connection means from each of a multiplicity of said continuous loops are connected together to form said unit.

4. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 2 wherein said means to induce said second magnetic field in said segment is microprocessor controlled.

5. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 1 wherein said two dissimilar metal segment means are nickel and copper.

6. A thermoelectric generator and magnetic energy storage unit with controllable electric output comprising:

a) two dissimilar metal segment means consisting of copper and nickel metallically joined to form alternate junctions and to form a minimum of one continuous loop in a torus shape and with open projections from said dissimilar segment means shaped to form a continuous heating channel means and a continuous cooling channel means, with electrical insulation between parts of said segments forming said heating channel means and said cooling channel means;

b) a heating and cooling means in said continuous channel means to heat and cool alternate ones of said junctions formed, thereby causing current to flow and generate a magnetic field in said unit;

c) a flux pump means with connections to inject additional current into said current flow thereby increasing the strength of said magnetic field and said magnetic energy storage capacity;

d) a means for instantaneously and controllably electrically disconnecting one of said segments in said loop;

f) output leads located one either side of said means for electrically disconnecting said one of said segments;

g) a control means to control said means for electrically disconnecting said one of said segments and for operating switches in said output leads.

7. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 1 wherein a first one of said two dissimilar metal segments is chosen from a group comprising copper, aluminum, brass, iron, silver and gold and a second one of said two dissimilar metals is chosen from a group comprising nickel, constantan and bismuth.

8. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 1 wherein an iron core means placed inside said segments to form said helix in said continuous loop acts to allow an increase in energy stored in said continuous loop when said segments are alternately heated and cooled and said flux pump means injects additional current into said loop.

9. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 5 further comprising a perforated ceramic thermal insulation means acting to thermally partially separate each half of each of said copper segment means to reduce heat flow and offer minimal resistance to electrical flow.

10. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 6 wherein said means for electrically disconnecting said one of said segments comprises one of said nickel segment means producing current flow and an integral part of said torus but modified to have a nickel plug separating two halves of said one of said nickel segment means, said nickel plug being removable by impact from a solenoid arrangement.

11. A thermoelectric generator and magnetic energy storage unit with controllable electric output comprising:

a) a copper segment means and a nickel segment means conductively joined to form alternate junctions and to form a minimum of one torus and with said copper segment means and said nickel segment means shaped to form a continuous heating channel means and a continuous cooling channel means with electrical insulation between parts of said segments forming said heating channel means and said cooling channel means;

b) a heating and cooling means in said continuous channel means to heat and cool said alternate junctions formed; thereby causing current flow and generate a magnetic field in said unit;

c) a flux pump means with connections to inject additional current into said current flow thereby increasing the strength of said magnetic field and said magnetic energy storage capacity;

d) a minimum of one of a first type variable switch means to withdraw alternating current from said torus;

e) a minimum of one of a second type variable switch means to withdraw direct current from said torus;

f) output leads located one either side of each of said switch means;

g) a control means to control activation of each of said first type and said second type partial switch means and for operating switches in said output leads.

12. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 11 wherein said first type variable switch means is a Colpitts Oscillator means acting to impress a controllable strength magnetic field of changing polarity across one of said nickel segments at right angles to said current flow in said torus thereby producing an alternating current through said output leads when said output leads are connected to a load.

13. A thermoelectric generator and magnetic energy storage unit with controllable electric output as in claim 11 wherein said second type variable switch means comprises a controllable circuit means acting to impress a controllable strength magnetic field of continuous non-changing polarity across one of said nickel segments at right angles to said current flow in said torus thereby producing said direct current to flow through said output leads when said output leads are connected to a load.

14. A thermoelectric generator and magnetic energy storage unit with controllable electric output comprising:

a) a multiplicity of tori each formed of two dissimilar metal segment means joined to form alternate junctions;

b) a heating and cooling means to heat and cool said alternate junctions of said segments; thereby causing current flow and generation of a first magnetic field contained in each of said tori;

c) a flux pump means with connections to each of said tori to inject additional current into said current flow thereby increasing strength of said first magnetic field in said unit;

d) a switching means and output connection means located in each of said tori with said output connection means located on either side of said switching means, said switching means being controllably operable in fractions of a second and operating to discharge current into said output connections when said output connections are electrically connected to a load.

Full details available at Patent Storm

Lets take a look at the first reason to consider magnetic energy over solar or wind – Cost!
A standard system build from the magnetic plans will generate on average 40% of your household needs.  The cost to manufacture this system will be in the region of $100 and the cost to maintain the system – free.

In comparison with a solar system that would cost twice as much and generate enough energy for around 30% of the same household, you have the disadvantage in that on a rainy day, you will produce less.  Wind turbines are less costly to manufacture, produce excellent energy for the home, but only work when there is wind.

The second benefit is that of maintenance, solar panels and wind turbines are exposed to the elements and require mantenance on a regular basis.  The magnetic system is housed internatally and has far less components that would require maintenance.

That leads us to the one disadvantage of the magnetic system.  The houseing that you will require may result in you having to build a outdoor shed or to house it in the garage which is not always possible.  For those living in confined areas with little or no free space, this may be an issue, where solar panels are out of sight and easy to install on any roof top.

All three of these systems are easy to manufacture and easy to install.  They all produce excellent energy reletive to the cost of manufacturing and are well worth the consideration.

Magniwork had garnered rave review from numerous alternative enegy publications and enthusiasts since it’s release in late April. The buzz surrounding the product has stirred up a Magniwork media frenzy! The Magniwork Plans show consumers how to construct a Magnetic Energy Generator capable of reducing or even eliminating their electric bill!

To celebrate the award, Magniwork is running a special promotional price of just $49 (75% Off) for a VERY limited time!

San Jose’s West Coast Green conference from last week had a point of attraction: the world’s first fuel-less car, made by Magnetic Air Car. They even say it will be produced beginning with 2010.

The Magnetic Air Car uses compressed air technology for propulsion, but unlike Tata Motors air engine, or DiPietro, theirs uses a different design: three on-board air compressors channel the air stream towards something that probably is a magnetic motor, something that everybody thinks is still Sci-Fi. But it’s not. The magnets, repelling each other, can be a source of movement, and, if properly propelled by an air jet, could have “devastating” effects in terms of power. Once again, this is only a probability, no exact specifications of their technology have been made yet.

Their Magnetic Air Car uses a silicon salt battery having 30% more mass power than a lead acid storage battery, and it can completely charge in one hour. The battery is also environmentally friendly: it’s 95% recyclable, and it can be used in almost extreme conditions: from -40 to +50 degrees Celsius. I say almost, because the temperatures inside a car during summer exceed 50 degrees.

A prototype of the car is being built at Club Auto Sport in San Jose and will be tested in the near future. It looks interesting enough to keep an eye on this company. Let’s hope it’s not a hoax.

Article Thank To GreenOptimistic.com

[via cleantechnica] ]]> http://humankindexperiment.com/diy-eco/magnetic-air-car/feed/ 0 http://humankindexperiment.com/diy-eco/how-does-magnetic-energy-work/ http://humankindexperiment.com/diy-eco/how-does-magnetic-energy-work/#comments Tue, 30 Jun 2009 13:48:26 +0000 Humankind http://humankindexperiment.com/diy-eco/?p=83 The magnetic energy generaters work on the principle of moving magnetic flow or ‘magnetic current’ to produce electrical power.  The system uses less energy than it produces, thus resulting in free energy. The initial process needs is often started by an external source, however, once the motion begins, it is perpetual, meaning that it continues to produce flow or current indefinately without having to be supported by any other source of power. 

Magnetic energy generators produce more energy through the attraction and repulsion of the magnetics fields than they need in order to keep the process in constant flow.  The excess energy can be used to power various appliances and with the right size free energy generator, you will be able to power your entire home.

So How Exactly Do These Systems Work?

The process of building a magnetic generator starts with understanding a little about how the system works.  The charging process begins in the copper wire coils which surround the magnets.  The flow of magnetic current between the positive and negative poles of the magnetic result in a flux of ‘current’ which is converted into electricity.

It is important to understand that although electrical and magnetic (energy) work with similar attitudes, the manner in which they work creates a differing energy effect. There is a continuous transmutation process taking place whereby magnetic energy continually generates an energy that manifests a measurable current.

For those who just want to know in laymans terms how this works – magnets pull and push with an ‘energy’ that can be harvested as electrical energy.  As long as the magnets have their own internal positive and negative poles, the ‘energy’ will continue to push and pull and convert to electricity.

This is free energy as you don’t need fossil fuel, you don’t need sunlight, you don’t need wind and you don’t need a massive amount of space.

For more information on this great product, visit us at Magniwork

The key uncertainty here is not hw the atmosphere will behave, but how humans will behave.  Will seven or more billion humans continue to seek fossil fuel-hungry lifestyles with cars and planes and such?  Or will we develop cleaner energy sources and treat amore lightly on the planet?  There’s no clear answer, the ultimate answer will depend on decisions made by each and every one of us.

Here’s what will happen when the earth temperature rises just one degree at a time.

One Degree:-

• Deserts invade the High Plains of the USA in a much worse repeat of the 1930′s dustbowl.  While the epicentre is Nebraska, states from Ontario in the north to Texas in the south will suffer severe agricultural losses.
• Mount Kilimanjaro loses all it’s ice.
• The Gulf Stream switches off – perhaps plunging Britain and Europe into icy winter cold.
• Rare species, like forest-dwelling frogs, possums and tree kangaroos, are wiped out in the Queensland rainforest, Australia, as warming erodes their habitat.
• Coral Reefs around the world suffer increasing losses from bleaching and are wiped out, with the Great Barrier Reef largely destroyed by 2030.
• Island nations submerge under the rising seas.

Two Degrees:-

• Oceans turn increasingly acidic, further hitting coral reefs and endangering the marine ecosystem.
• One summer in two has heatwaves as strong as 2003′s disaster in Europe.
• Greenlands tips into irreversible melt, accelerting sea level rise and threatening coastal cities around the world.
• Polar bears, walruses and other ice-dependent marine mammals become extinct in the Artic as the icecaps disappear.
• Drought, fire and searing heat strike the Mediterranean basin.
• Declining snowfields threaten water supplies in California.
• A third of species worldwide face extinction as the climate changes.

Three Degrees:-

• The Kalahari Desert spreads across Botswana, engulf the capital in sand dunes, driving millions of refugees out to surrounding countries.
• A permanent el nino grips the Pacific causing weather chaos around the world and drought in the Amazon.
• Water runs short in Perth, Sydney and other parts of Australia away from the far north and sounth.
• Agriculture shifts into the far north – Norways growing season becomes like southern England is today.  But with declines in the tropics and sub-tropics due to the heat and drought, the world tips into net food deficit.
• The whole Amazonian ecosystem collapses in a conflagration of fire and destruction.  Desert and savannah eventually take over where the world’s largest rainforest once stood.  Huge amount of carbon pour into the atmosphere, adding another degree to global warming.
• Hurricanes strike the tropics that are half a category stronger than today’s, with higher wind speeds and rainfall.  Wind speeds in the strongerst storms could rise to 200 miles per hour.
• The Indus River runds dry due to glacial retreat in the Himalayas, forcing millions of refugees to flee Pakistan.  Possible nuclear conflict with India over water supplies.

Four Degrees:-  (Are we getting the message yet?)

• Most of the Nile Delta is threatened by rising seas, as is a third of Bangladesh.  Tens of millions more become climate refugees.
• West Antartic ice sheet potentially collapses, pumping five metres of water into global sea levels
• Southern Europe becomes like the Sahara, with deserts spreading in Spain and Portugal.
• All glaciers disappear from the Alps, further reducing water supplies in Central Europe.
• Permafrost melt in Siberia releases billions of tonnes of methane and carbon dioxide, meaning even larger increases in global warming.

Five Degrees:-

• Earth is hotter than it has been in over 55 million years.
• Desert belts expand from the subtropics into termperate regions.  Civilization collapses as humanity is unable to cope.
• Methane hydrate is realeased from underneath the oceans, sparking tsunamis in coastal regions and pushing global warming into an unstoppable spiral.
• Much of the world in uninhabitable.

Six Degrees:-

• Mass extinction scenario:- The end permian mass extinction 251 million years ago was associated with six degrees of warming, and wiped out 90% of life on earth.  No one is sure what happenened, but a combination of volcanic CO2, releases and methane hydrates may have been the cause ( This was much worse than the end-cretaceious mass extinction, 65 million years ago, which wiped out the dinosaurs).
• Huge firestorms sweep the planet as methane hydrate fireballs ignite.
• Seas turn anoxic (without oxygen) and release poisonous hydrogen sulphide
• Humanity’s very survival as a species is in question?

(This is an brief, extract summery from the book called Six Degrees, written by Mark Lynas, published in March 2007 by Fourth Estate)